A robust Layer 3 managed switch built to power and connect a large fleet of PoE devices — access points, IP cameras, VoIP phones — from a single unit. With Layer 3 routing built in, it can handle inter-VLAN traffic directly without needing a separate router, simplifying network design for growing offices or CCTV installations.

Key Features:

• 24× Gigabit PoE/PoE+ ports (10/100/1000BASE-T) + 4× Gigabit SFP uplink ports

• 370W total PoE budget, up to 30W per port

• Layer 3 routing (static routing, up to 500 IPv4 routes)

• 56 Gbps switching capacity, 41.66 Mpps forwarding rate

• 4,094 VLANs, 16,000 MAC address table entries

• 6kV surge protection on service ports

• Free lifetime cloud management via Ruijie Cloud app

• PoE watchdog — auto-reboots unresponsive PoE devices

• 19-inch rack-mountable, 5-year warranty

A cost-effective managed switch built specifically for IP surveillance and access-point deployments — automatic IP camera recognition simplifies setup, and 370W of PoE+ power runs cameras, APs, and VoIP phones without separate power adapters. Cloud management via the Ruijie app means you can monitor and configure the switch remotely, no on-site visits needed for routine changes.

Key Features:

• 24× Gigabit PoE/PoE+ ports (10/100/1000BASE-T) + 4× Gigabit SFP uplink ports

• 370W total PoE budget, up to 30W per port

• Layer 2 managed switch, 56 Gbps switching capacity

• IP Camera Recognition — auto-detects and simplifies CCTV network setup

• 4,094 VLANs, 8,000 MAC address table entries

• 6kV surge protection on service ports

• Free lifetime cloud management via Ruijie Cloud app

• 19-inch rack-mountable, 5-year warranty

A high-capacity Layer 3 access switch built for large offices, campuses, or multi-floor buildings needing dense PoE port count. 48 Gigabit ports power a large fleet of APs, cameras, and phones, while 4 dedicated 10GE uplink ports keep the connection to your core network fast even under heavy load. Cloud management means remote configuration and monitoring without needing on-site IT visits for routine tasks.

Key Features:

• 48× Gigabit RJ45 ports (PoE/PoE+/PoE++ capable) + 4× 10GE SFP+ uplink ports

• Layer 3 managed switch with full routing support

• Dual-core CPU (1.0GHz per core), 1GB memory, 512MB flash

• 10kV surge protection

• Cloud-managed via Ruijie Cloud app — remote monitoring & configuration

• 19-inch rack-mountable design

• Suited for campus aggregation and high-density access deployments

A Layer 3 access switch sized for mid-size offices and floor-level deployments — 24 PoE+ ports power access points, cameras, and phones directly, while 4 dedicated 10GE uplink ports keep your connection to the network core fast. Cloud management lets you configure and monitor remotely without a site visit.

Key Features:

• 24× Gigabit RJ45 ports (PoE/PoE+/PoE++) + 4× 10GE SFP+ uplink ports

• Layer 3 managed switch with full routing support

• Cloud-managed via Ruijie Cloud app

• 10kV surge protection

• 19-inch rack-mountable design

• Suited for floor-level access deployments in offices and campuses

A high-capacity Layer 3 access switch built for large offices and campuses needing to power dozens of devices at once — 48 PoE+ ports deliver up to 405W total, enough for access points, IP cameras, and phones across a full floor, while 4 dedicated 10GE uplink ports keep your core network connection fast under heavy load.

Key Features:

• 48× Gigabit RJ45 PoE/PoE+ ports (405W max PoE budget) + 4× 10GE SFP+ uplink ports

• Layer 3 managed switch, 176 Gbps switching capacity, 132 Mpps forwarding

• Dual-core CPU (1.0GHz), 1GB memory, 512MB flash

• 10kV surge protection

• Free cloud management via Ruijie Cloud app

• 19-inch rack-mountable, 460W max power consumption

A Layer 3 access switch sized for mid-size offices and floor-level deployments — 24 PoE+ ports power access points, cameras, and phones directly, while 4 dedicated 10GE SFP+ uplink ports keep your connection to the network core fast. Cloud management lets you configure and monitor remotely without a site visit.

Key Features:

• 24× Gigabit RJ45 PoE/PoE+ ports + 4× 10GE SFP+ uplink ports

• Layer 3 managed switch with full routing support

• 128 Gbps switching capacity, dual-core CPU (1.0GHz), 1GB memory

• 10kV surge protection

• Cloud-managed via Ruijie Cloud app — remote monitoring & configuration

• 19-inch rack-mountable design

A high-performance core/aggregation switch built for data centers and large enterprise networks needing serious backbone capacity — 20 high-speed SFP+ ports handle server and switch connections, while 40G QSFP+ uplinks push traffic through the network core without bottlenecking. VSU virtualization lets multiple physical switches act as one logical unit, simplifying management and boosting reliability.

Key Features:

• 20× 1GE/2.5GE/10GE SFP+ ports, 4× 10GE/25GE SFP28 ports, 2× 40GE QSFP+ ports (supports up to 32× 10GE ports total)

• Full Layer 3 routing: static routing, RIP, OSPF, IS-IS, BGP4, IPv4/IPv6 dual-stack

• VSU virtualization for unified multi-switch management

• Hot-swappable power & fan modules with redundancy

• 16,000 ARP table entries, 32,000 MAC address table

• 1U rack-mountable, 4.6kg

A Layer 3 access switch engineered for large enterprise and campus networks needing reliable, high-speed connectivity. 24 Gigabit ports handle end-device connections while 4 dedicated SFP+ ports (1G/10G) provide fast, flexible uplink options as your network scales.

Key Features:

• 24× 10/100/1000BASE-T ports + 4× 1G/10G SFP+ uplink ports

• Layer 3 managed switch, 154 Gbps switching capacity, 115 Mpps forwarding rate

• Dual-core CPU (1.0GHz), 1GB memory, 512MB flash

• 32,000 MAC address table, up to 12,000 IPv4 unicast routes (authorized)

• Jumbo frame support, STP/RSTP/MSTP, ERPS (G.8032)

• 19-inch rack-mountable, 3.1kg, fanless design

A high-performance Layer 3 access switch built for large enterprise and campus networks needing serious port density. 48 Gigabit ports connect a full floor of devices, while 4 dedicated 10GE SFP+ uplinks keep the connection to your network core fast even under heavy traffic. VSU virtualization enables millisecond-level failover, so a hardware fault doesn't take down the whole segment.

Key Features:

• 48× 10/100/1000BASE-T ports + 4× 1GE/10GE SFP+ uplink ports

• Layer 3 managed switch, 176 Gbps switching capacity, 131 Mpps forwarding rate

• VSU virtualization technology — up to 8 members, millisecond failover

• Dual-core CPU (1.2GHz), 1GB memory, 2GB flash

• 32,000 MAC address entries, up to 16,000 ARP entries (with license)

• CPP/NFPP security policies protect against malicious traffic

• 19-inch rack-mountable, 2 modular power supply slots

A Layer 3 access switch built for mid-size enterprise and campus deployments — 24 Gigabit ports handle a floor's worth of devices, while 4 dedicated 10GE SFP+ uplinks keep the connection to your network core fast. VSU virtualization enables millisecond-level failover, adding resilience without extra hardware complexity.

Key Features:

• 24× 10/100/1000BASE-T ports + 4× 1GE/10GE SFP+ uplink ports

• Layer 3 managed switch, 208 Gbps switching capacity, 155 Mpps forwarding rate

• VSU virtualization technology — up to 8 members, millisecond failover

• Dual-core CPU (1.2GHz), 1GB memory, 2GB flash

• 32,000 MAC address entries, up to 16,000 ARP entries (with license)

• CPP/NFPP security policies protect against malicious traffic

• 19-inch rack-mountable

A cost-effective Layer 2+ managed switch built for enterprise campuses, government institutions, and schools needing dense, reliable Gigabit access without full Layer 3 routing overhead. 48 ports handle a large fleet of devices, while dual-speed 4× SFP+ uplinks (1G/10G) keep your uplink connection fast and flexible as needs grow.

Key Features:

• 48× 10/100/1000BASE-T ports + 4× 1G/10G SFP+ uplink ports (non-combo)

• L2+ managed switch, 264 Gbps switching capacity, 132 Mpps forwarding rate

• VSU virtualization for flexible, resilient networking

• Access control lists, port security, QoS traffic prioritization

• STP for loop prevention and redundancy

• 512MB RAM, 16K MAC address table

• Not PoE-powered

• 19-inch rack-mountable, 4kg

A reliable magnetic reed-switch sensor that alerts you instantly via the DMSS app when a door or window opens while armed — no wiring needed, just a compact sensor and magnet pair. Two-way communication with frequency hopping keeps the signal stable, even in busier RF environments like apartment blocks or offices.

Key Features:

• Reed switch sensor, two-way RF with frequency hopping

• Communication range up to 1,000–1,200m in open space

• Low battery alarm, signal strength detection, tamper alert

• Built-in temperature monitoring

• Runs on CR123A battery — up to 3–4 years battery life

• AES128 encrypted communication

• Cloud update with automatic recovery

• Pairs with Dahua ARC wireless alarm hubs & DMSS app

• Wall/frame mount installation

A smart motion sensor that tells the difference between pets and people — with pet immunity up to 18kg, your dog or cat won't trigger false alarms while you're out. Covers a 12m range at 90° detection angle, with 3 adjustable sensitivity levels to fine-tune performance for your space.

Key Features:

• Dual-element low-noise PIR sensor, 12m detection range (90°) at 2.2m install height

• Pet immunity up to 18kg (39.68 lbs)

• 3-level adjustable sensitivity, detects movement from 0.3–3 m/s

• White light resistance up to 2,000 lux — reduces false triggers from sunlight/lighting

• Two-way RF communication with frequency hopping

• Low battery alarm, tamper detection, temperature monitoring (-15°C to +65°C)

• AES128 encrypted communication, cloud update

• Pairs with Dahua ARC wireless alarm hubs & DMSS app

The brain of your home or shop security system — connects up to 150 wireless sensors, keyfobs, and sirens into one managed network, with real-time alerts through the DMSS app. Triple network backup (WiFi, Ethernet, and 4G LTE) means the alarm stays connected even if your internet drops, so you're never left without coverage during an outage.

Key Features:

• Supports up to 150 wireless peripherals (6 sirens, 64 keyfobs, sensors, PIRs)

• Multi-network backup: WiFi, Ethernet, and 4G LTE

• Two-way RF communication with frequency hopping, AES128 encryption

• Built-in lithium battery — keeps working during power outages

• Video linkage support (pairs with compatible Dahua cameras)

• Offline cache: up to 50 entries (stores events if disconnected)

• Communication range up to 2,000m in open space

• Cloud update, remote management via DMSS app

• Compatible with all Dahua ARD-series door/PIR detectors and sirens

A standalone biometric attendance terminal built for offices, factories, and shops that need accurate clock-in/clock-out tracking without a full HR system. Fast fingerprint verification (under 1.5 seconds) with fingerprint-only, password-only, or combined authentication gives flexibility for different security needs, and generates ready-to-export attendance reports without needing a connected PC.

Key Features:

• 2.4" TFT color display, 320×240 resolution

• Fingerprint capacity: 2,000 | User capacity: 1,000 | Attendance records: 100,000

• Fingerprint response time ≤1.5s, FAR ≤0.00004%, FRR ≤0.15%

• Verification modes: Fingerprint + Password, Fingerprint only, Password only

• 6 attendance event types (Check In/Out, Break In/Out, Overtime In/Out)

• USB import/export for user data, fingerprints, shifts & reports

• Voice prompts, T9 text input, daylight saving time support

• Schedule by user or department, up to 24 shift groups, 20 departments

• Power: 5VDC/1A, Compact: 175 x 120 x 23mm, 0.35kg

A robust access control panel built to manage up to 4 doors from a single unit — ideal for offices, warehouses, or multi-entry buildings needing centralized, scalable security. Supports card, password, fingerprint, or combined authentication, and integrates with biometric readers for high-security areas like server rooms or executive offices.

Key Features:

• Manages 4 doors, supports up to 100,000 valid cards & 150,000 event records

• Authentication: Card, Password, Fingerprint, or Combination

• TCP/IP interface to PC (RJ45, 10/100M) + Wiegand/RS-485 to readers

• Alarm functions: door time-out, intrusion, duress, and tamper alarms

• Anti-pass back, multi-door interlock, multi-card unlock

• 128 groups of schedules, periods & holiday settings

• Scalable up to 64 controllers managed centrally via SmartPSS

• Power: 9-15VDC/500mA, Dimensions: 280 x 320 x 114mm, 2kg

A compact access control reader that combines fingerprint and RFID card verification in one unit — mount it at any door to add biometric security on top of standard card access. Fast fingerprint recognition (under 1.5 seconds) and blue backlit display make it easy to use even in low-light entryways.

Key Features:

• Reads 13.56MHz MIFARE cards, up to 3,000 fingerprint capacity

• Fingerprint recognition time ≤1.5s, FAR ≤0.00004%, FRR ≤0.15%

• RS-485 protocol, Wiegand support

• Tamper detection with watchdog function

• Blue backlit display, audible buzzer + LED indicators

• Power: 9-15VDC, 100-200mA

• Surface-mount installation

• Compact: 125-165mm W x 47-57mm D x 29-56mm H (varies by version)

An advanced access and attendance terminal combining AI face recognition with fingerprint verification for maximum security and speed — live face detection blocks spoofing attempts using photos or videos, so it can't be fooled by someone holding up a picture. Recognizes faces in under 1 second, even in poor lighting, and works equally well as a time attendance system or standalone door access controller.

Key Features:

• 4.3" touchscreen, 480×272 resolution

• Dual-biometric: Face recognition (1,000 templates) + Fingerprint (3,000 templates)

• Face recognition time ≤1s, live face anti-spoofing detection

• Card capacity: 30,000 (13.56MHz Mifare / 125KHz EM)

• Transaction logs: 150,000

• Verification modes: Face, Fingerprint, Card, Password, or any combination

• TCP/IP + WiFi connectivity, supports remote management via SmartPSS

• HD dual-camera (2.0MP visible + 1.3MP infrared)

• 6 customizable attendance event types, USB report export

• Power: 12V/2A, 800g

A complete video intercom system for homes, villas, and small offices — see and speak with visitors from a 7-inch touchscreen monitor inside, or answer remotely via the Dahua DMSS app when you're away. The weatherproof outdoor doorbell station delivers sharp 2MP HD video with night vision, and PoE power means simple, one-cable installation.

Key Features:

• 7" TFT capacitive touchscreen monitor, 1024×600 resolution

• Outdoor door station: 2MP HD CMOS camera, IR night vision, auto WDR

• Unlock methods: IC card, remote app, or indoor monitor button

• Two-way video/audio calling, visitor voice & video messaging

• H.264/H.265 video compression

• IP65 weatherproof outdoor station, PC+ABS build

• Standard PoE support (includes 4-port PoE switch in most kit bundles)

• Supports microSD storage (up to 256GB) for saved visitor videos

• DMSS app for remote monitoring and door unlock

A cost-effective indoor monitor that integrates video intercom, camera monitoring, and door unlock in one panel — answer calls from your Dahua outdoor door station, view connected IP cameras, and unlock doors remotely, all from a clear 7-inch touchscreen. Standard PoE support means power and network run over a single cable, simplifying installation.

Key Features:

• 7" TFT capacitive touchscreen, 1024×600 resolution

• IPC surveillance — view connected Dahua/ONVIF IP cameras

• 6-channel alarm input, 1-channel alarm output

• Dual-way bidirectional talk with echo cancellation

• Embedded 8GB storage (supports microSD up to 32GB)

• Leave video/text messages, DND mode scheduling, SOS alarm

• Supports up to 9 sub-stations for multi-monitor households

• Standard PoE, DC 12V 1A power

• Wall-mounted, 119.6 x 221.5 x 21.5mm